2014 Morbark M15R 15″ Professional Wood Chipper

The Morbark Beever M15R Chipper is a high-capacity, high production chipper designed to handle all of your vegetation management needs. The M15R is ideal for residential tree services, utility line clearing, contractors and municipalities. This chipper offers the most features of any chipper in its class. More than 6,600 lb./ft. of material pulling force is generated from the TorqMax dual feed wheel compression system. The Curbside Control Option enables you to control the chipper efficiently from one location and its rear-mounted controls provide full visibility of the infeed and drum areas. Material can be briefly backed away from the drum and forward feed can be automatically stopped thanks to the reversing auto-feed.

The chipping drum provides maximum chipping efficiency with 30″ diameter four-knife staggered knife-pocket drum with patented removable knife holders and Vortex chambered air-impeller system. Hydraulic Down Pressure System creates 6,600 lbs. of perpetual down pressure, which eliminates the needs for springs. Aftermarket components are installed easily because the chipper has been outfitted and pre-plumbed.

* Powerful tier III 147hp Perkins Turbo Diesel Engine w/ Block Heater

* No DEF system or catalytic converters allows a lower cost of ownership!

* ONLY 1520 HOURS

* Morbark Auto Feed w/ reversing function

* Factory 5,000lb hydraulic winch included

* Hydraulic yoke lift / crush cylinder with 4,400 pounds of crushing force!

* Upper & lower horizonal feed wheels. Upper feed wheel 6,600lbs of material pulling force!

* Massive 56″ wide feed table

* 20.5″x18″ throat opening w/ 15″ capacity

* Removable patented knife pockets

* NEW BLADES AND HARDWARE

* Serviced with new fluids and filters

* 360 Degree Rotating, Adjustable Chute, LED lights, pintle hitch

* Heavy duty 6″ steel tube and channel frame for maximum commercial durability

* Paint is in excellent condition! Looks new!

* READY TO GO!!

* We ship anywhere in and out of the country!

SPECS:

General Chipping capacity . . . . . . . . . . . . . . . . . . . 15″

Height . . . . . . . . . . . . . . . . . . . . . . . . . . 8’11”

Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7’3″

Length . . . . . . . . . . . . . . . . . . . . . . . . . . 18’1″

Gross weight (approximate) . . . . . . . . 8,900 lbs.

Suspension . . . . . . . . . . . . . . . 9,000 lb. Torflex

Infeed opening . . . . . . . . . 56″ wide x 37″ high

Throat opening . . . . . . . 20½” wide x 18″ high

Drum . . . . . . . . . . 23¾” wide x 30″ diameter

Engine . . . . . . . . . . . . . . . . . CAT

Horsepower . . . . . . . . . . . . . . . . . 147 HP

Fuel capacity . . . . . . . . . . . . . . . . . . 32 gallons

Hydraulic capacity . . . . . . . . . . . . . . 12 gallons

Frame . . . . . . . . . . . . . . . . 8.2 lb., 6″ channel

Tires . . . . . . . . . . . . . . . . . . (2) 215/75Rx17½”

Hitch . . . . . . . . . . . . . . . . . . . . 2½” Pintle Ring

Please be advised that we price all of our machines very competitively with respect to condition. If you have an issue with the price, please consider other units in your price range. We take pride in our work knowing that no one in the region matches the quality of our pre-owned machines. We refurbish most of our units for immediate use and would like to continue to provide a quality product. 

If you have a trade or would like to sell us your old machine, please message us through eBay.

ABOUT US:

ECC Machinery of New Castle, Delaware specializes in heavy equipment and commercial vehicle sales, service and reconditioning. We are the east coast’s trusted source for offering great value and getting the job done right! We offer personalized service you can depend on to meet your business growth needs. Within the past year and a half we have sold over $1,500,000 worth of equipment to customers across the continental United States from East coast Delaware to California on the West coast!

PAYMENTS / DEPOSITS:

ECC Machinery accepts non-refundable PayPal payments through eBay for payments up to $1,000. All remaining payments or complete payments must be made by: cash, bank check, money order, certified check, credit card or debit card. All card payments are subject to a 3.75% service charge. We do NOT accept personal checks, business checks or American Express.

FINANCING:

We offer financing for qualified buyers through Beacon Hill Funding. If you need financing, please secure it before clicking “Buy It Now”. Please Google Beacon Hill Funding for their info. Once approved, all purchases need to go through eBay.

SHIPPING:

ECC Machinery is located at 19 King Court, New Castle DE 19720.  Open 7 days a week BY APPOINTMENT!

We are a family-owned dealership with limited staff, so please let us know before coming. Sometimes we’re out picking up and delivering machinery, out performing service calls, ordering parts, helping other customers, painting equipment, etc.

+Complimentary FREE shipping UP TO 300 MILES for pre-paid customers if requested from zip code 19720 and asking price is met. Anything over 300 miles will be at an additional cost of $1.20/mi. We deliver all over the country! Maine, Georgia, Missouri and New York most recently!

+3rd-party shipping is also an option. Typically it’s about 1.5k to ship to central U.S., ~2k to Texas and up to 2.5k to ship to the West Coast. Just message us for a quote or utilize Uship.com. Do not be intimidated by shipping. It really is easy. We can handle shipping entirely if you would like us to so all you have to do is pay and be ready to receive your Machinery on the assigned date.

+You as the Buyer are responsible for removing purchased machinery from our location within 30 days of purchase. After 30 days the Buyer will be responsible for paying $25 per day in storage fees.

Terms of Sale

Buyers are bound to the Terms of Sale on the Bill of Sale. All items are sold “AS IS” “WHERE IS” and “WITH ALL FAULTS” without any implied, expressed, special or written warranties or service contracts. ECC MACHINERY AND ANY CONSIGNOR SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. Some states do not allow the disclaimer of implied warranties, so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.

Equipment details and related information is limited to sight, sound, feel, limited operational running and testing at low speeds, in a confined flat area, without load, and in limited operating conditions during a limited time period. While we make effort to represent all Machines accurately, some information used in our ads may be from unverified third-party sources. Photos take priority if there are discrepancies within this listing. It is the Buyer’s responsibility to verify ALL Machine information and specifications directly with the Manufacturer prior to purchase including (but not limited to): VIN, year, make, model, horsepower, fuel type, regulatory compliance, safety mechanisms, weight, dimensions, specifications, options, packages, services performed, features, attachments and abilities. 

It is also the Buyer’s responsibility to inspect each Machine in-person with an unbiased 3rd-party expert for mechanical soundness, safety, integrity and quality prior to purchase. Buyer agrees to repair and maintain, at his or her cost, any goods purchased to a safe operating condition and, without limitation, to a condition which meets any standard or requirement of any applicable authority, law or regulation including those concerning any use to which the goods may be put. All hours on Meters and Odometers are perceived to be correct unless stated otherwise in handwriting. Hours and or Mileage may be fractionally higher from potential buyers testing Machine operations before the Machine is sold. Buyer acknowledges they are experienced with this type of Machine and Buyer is responsible to service, repair and maintain all items purchased to a safe operating condition and obtain all permits and certification required by law for use. It is the Buyer’s responsibility to purchase and comprehend all Manufacturer safety, operation, and maintenance Media related to the Machine and Attachments prior to operation. The Buyer is also responsible for adhering to safe and proper training of Machine Operators as required by law and the Manufacturer.

ECC Machinery nor any Consignor makes any representation or warranty, express or implied, as to the nature, quality, value or condition of any item, nor that goods conform to any standard in respect to safety, pollution or hazardous material or to any standard or requirement of any applicable authority, law or regulation.

California Buyers Note:

 “When operated in California, any off road diesel vehicle may be subject to the California Air Resources Board In-Use Off-Road Diesel Vehicle Regulation. It therefore could be subject to retrofit or accelerated turnover requirements to reduce emissions of air pollutants.” For more information, please visit the California Air Resources Board website at http://www.arb.ca.gov/msprog/ordiesel/ordiesel.htm.

“An on-road heavy-duty diesel or alternative-diesel vehicle operated in California may be subject to the California Air Resources Board Regulation to Reduce Particulate Matter and Criteria Pollutant Emissions from In-Use Heavy-Duty Diesel Vehicles. It, therefore, could be subject to exhaust retrofit or accelerated turnover requirements to reduce emissions of air pollutants. For more information, please visit the California Air Resources Board website at http://www.arb.ca.gov/dieseltruck.

PLEASE PURCHASE WITH CONFIDENCE! WE HAVE 99% POSITIVE FEED BACK RATINGS FROM OVER 1,800 TRANSACTIONS FROM AROUND THE COUNTRY!